Identify this equipment
Resolve the asset and read the tag back. An uncertain match waits for the technician to confirm it before an observation is attached.
Product concept · October 2026
A hands-free technician aide for plants, factories, substations and industrial facilities. Ask a short question, see the equipment in view, and leave a record the next person can use. The technician confirms the asset and the note before anything is saved.
The question in front of you
Short exchanges for orientation, inspection and record capture. Repeat, cancel and push-to-talk stay available where the floor is loud. Spoken confirmation applies to the asset and the record. Voice does not operate the equipment.
Resolve the asset and read the tag back. An uncertain match waits for the technician to confirm it before an observation is attached.
State the observed value, the units and where the reading came from. The source image stays with the note so the number can be checked.
Find the description in the equipment reference: the label, the function and the manual section. A missing reference is said out loud, not filled in.
Draft the observation, read it back, and save only after the technician confirms. The record can stay queued until it syncs.
Camera and context
Visual cues, the tag and the location work together. Nearby equipment and the site catalog narrow the candidates. The technician still confirms the match.
Read a tag or serial number and match it to the equipment record for this facility.
Suggest a pump, motor, valve or transformer from the trained models supplied for that site.
Use nearby assets, the inspection route and reference photos to separate lookalike equipment.
Illustrative round
The dialogue below is an example, not a field transcript. Values such as P-204 and 4.2 bar are illustrative. A live reading from a historian would be labeled with its own source and time.
| Technician | Intended aide response |
|---|---|
| Start the pump round. | Inspection selected. The first asset is P-204. |
| Is this P-204? | The tag suggests P-204. Confirm the asset. |
| Confirmed. Read the gauge. | Approximately 4.2 bar from this image. |
| Add: label is difficult to read. | Note added to the draft observation. |
| Read it back, then save. | Here is the draft. Confirm to save. |
The same questions, different sites
The questions stay familiar. The equipment list, manuals and work context are configured for that site. Imagery is not treated as proof that machinery is energized, isolated or safe.
| Setting | What the technician asks | Useful context |
|---|---|---|
| Process plant | Which pump and valve am I viewing? | Tags, pressure, temperature and the inspection route |
| Factory | What does this selector position mean? | Machine identity, modes and the maintenance reference |
| Substation | Which asset is this, and what work is assigned? | Equipment record, nameplate and authorized work context |
| Industrial facility | What should I record on this round? | Motors, compressors, utilities and the recurring checks |
What the next person receives
A useful handoff names the asset, the reading, the evidence and whether the record is still a draft, confirmed, queued or synced.
The inspection reference stays with the note, so the observation is not a loose comment.
A camera estimate is labeled as a camera estimate. The frame and the capture time stay with it.
Explanations point at the approved document. Controls are described from that document, not invented.
This page describes the target experience for a site pilot: one inspection route, one equipment family, registered assets, approved manuals, and a camera and voice device chosen for that floor. Identity, readings and the saved record are confirmed by the technician. No certification, performance target or return is claimed, and a knob position is not treated as proof of operating state.
Bring a facility, the equipment family and the references that already govern the work. Tech Maven Geospatial will map that into a focused GeoVerse3D pilot.